Electromagnetic anechoic box/Shield box Production line type MY2510
- Compact electromagnetic anechoic box for production linessuch as radio equipment, terminal and module.
- By installing the jig inside, shorten the tact time and improve the reproducibility of each communication test.
- Support a wide range of applications and reduce equipment costs.
|Structure||Double structures with radio wave absorber and aluminum plate|
|Radio wave absorber||MYA-75 (thickness approx. 3cm)|
|Reflection Loss||more than 20dB (MYA-75 : more than2.4GHz)|
- One touch lock mechanism
The shield effect is maintained despite simple opening and closing motion, and the burden on the operator will be also reduced.
- Safety against overturning
It can be fixed to the working desk or shelf because integrated with the pedestal.
- Support to customization
Based on actual operating conditions, the various customizations will be supported. Need extra cost.
|I/F module||I/F module is equipped with AC power supply, DC power supply, LAN,USB, SMA, BNC, N, Triaxial, D-sub connectors and Through pipe.
The I/F module can be easily replaced if needed.
|IFM1||AC(1pc), LAN(1pc), USB(1pc), D-sub9pin(1pc)|
|IFM2||AC(1pc), LAN(2pcs), USB(2pcs), D-sub9pins(1pc)|
|IFM3||AC(1pc), LAN(2pcs), USB(2pcs), D-sub25pin(1pc)|
|IFM4||DC(1pc), LAN(1pc), USB(1pc), D-sub9pins(1pc), D-sub25pin(1pc)|
|IFM5||SMA(2pcs), BNC(2pcs), N(2pcs), Triaxial(2pcs)|
|IFM6||Through pipe (2 kinds are selectable.)
*Inner diameter is different depending on the frequency band.
|Surface treatment of radio wave absorber||This prevents fragment of radio wave absorber from adhering to products.|
- Installing a jig
- Modification of rear part
The specified jig is fixed in the anechoic box after processing the main body. (Only when shipping)
If the antenna or connector position is changed in the future, the desired panel can be installed after removing the rear panel.
* MICRONIX Corporation reserves the right to make changes in design, specification and other information without prior notice.