Antennas, cables, etc., Test accessories lineup.
Each nine kinds of antennas M301 to M309 / M401 to M407 cover the frequency band from 300MHz to 6.2GHz.
Connectors: SMA(P)@M300, N(P)@M400
Model Frequency range M301/401 0.8 to 1GHz M302/402 1.25 to 1.65GHz M303/403 1.7 to 2.2GHz M304/404 2.25 to 2.65GHz M305/405 300 to 500MHz M306/406 4.8 to 6.2GHz M307/407 470 to 770MHz M308 3.6 to 4.2GHz M309 4.4 to 4.9GHz
Loop Antenna MAN120
Antenna suitable for detection of low frequency signal and noise.
Frequency range 50kHz to 33MHz Connector N(P) Impedance 50Ω Dimensions 420(φ)x13(T)mm Weight 1.2kg
Patch Antenna M211/211R
This is a right circular polarization antenna used in the ETC/DSRC.
Spiral Antenna M212/212R
This is a right circular polarization antenna with frequency band from 2 to 18GHz.
Log Periodic Antenna M213/213R
This is a linear polarization antenna with frequency band from 700MHz to 5GHz.
Biconical Antenna MAN150/MAN150B
Suitable for simplified measurement of radiated emissions.
Model MAN150 MAN150B Frequency range 20MHz to 3GHz 30MHz to 1GHz Gain -45dBi to +1dBi(nominal) -31dBi to +1dBi(nominal) Antenna factor 20 to 51dB/m 17 to 31dB/m Max. transmission power 1W 1W Connector SMA(J) SMA(J) Dimensions 350(L)x160(W)x140(D)mm 540(L)x225(W)x225(D)mm Weight approx.350g approx.1150g
Magnetic Field Probe MMP500
Conducted disturbance noise measurement up to 9kHz low frequency.
Using this measurement system, it is possible to measure the conducted disturbance noise of the power supply line without electrical contact and without using LISN. In addition, the disturbance noise on PCB can be measured without contact. Optimum for measuring power electronics equipment used in such as automotive industry.
Frequency range 9kHz to 100MHz Maximum measurement level 117dBμV Applied model MSA538E, MSA558E
Magnetic Field Probe CP-2SA
CP-2SA is used to measure the noise on a print circuit board connecting to the spectrum analyzer of MSA300/400/500 series.
Frequency range 10MHz to 3GHz Space resolution approx.0.25mm
(depending on objects)
Applied model MSA300/400/500
Wide Band Passive Probe MP300
MP300 is a passive probe with low input capacitance and wide frequency band.
Frequency range DC to 6GHz Attenuation 10 : 1±2% input resistance 500Ω±2% Input capacitance 0.25pF (typ) Applied model MSA300/400/500
Return loss of electronic parts or circuit can be measured.
Coaxial Attenuator MG-XXdB
Attenuation: 1 to 10dB(1dB step), 12 to 15dB(1dB step), 20dB and 30dB Freq. range: DC to 18GHz(DC to 8GHz @MG-30dB)
|Model||Attenuation error||VSWR||Rated power|
|DC to 12.4GHz||12.4GHz to 18GHz|
|MG-1dB, 2dB, 3dB, 4dB||<±0.5dB||<±1dB||<1.15@DC to 4GHz
<1.2@4 to 12.4GHz
<email@example.com to 18GHz
|MG-5dB, 6dB, 7dB, 8dB||<±0.7dB||<±1.2dB|
|MG-9dB, 10dB, 12dB, 13dB||<±1.0dB||<±1.25dB|
|MG-14dB, 15dB, 20dB||<±1.2dB||<±1.3dB|
|MG-30dB||<±1.2dB@DC to 8GHz||<1.2@DC to 8GHz|
Freq. range: DC to 18GHz@MG-50S, DC to 8GHz@MG-50N
|Model||Frequency range||VSWR||Power termination||Connector|
|DC to 4GHz||4 to 8GHz||8 to 12.4GHz||12.4 to 18GHz|
|MG-50S||DC to 18GHz||<1.08||<1.10||<1.15||<1.20||0.25W||SMA(P)|
|MG-50N||DC to 8GHz||<1.2@DC to 8GHz||2W||N(P)|
The adapters of 50Ω/75Ω, 50Ω/50Ω and 75Ω/75Ω are available according to the connector.
|MA301||BNC(P)/BNC(J)||50Ω/75Ω||DC to 2GHz|
|MA302||BNC(P)/N(J)||75Ω/75Ω||DC to 1.8GHz|
|MA303||BNC(P)/N(P)||75Ω/75Ω||DC to 1.8GHz|
|MA304||BNC(P)/F(J)||75Ω/75Ω||DC to 1.8GHz|
|MA305||BNC(P)/F(P)||75Ω/75Ω||DC to 1.8GHz|
|MA306||N(P)/SMA(J)||50Ω/50Ω||DC to 12.4GHz|
|MA307||N(P)/BNC(J)||50Ω/50Ω||DC to 2GHz|
|MA308||N(P)/BNC(J)||50Ω/75Ω||DC to 2GHz|
|MA309||N(J)/BNC(P)||50Ω/50Ω||DC to 2GHz|
Many kinds of coaxial cables are available according to the frequency band, the connector and the length.
|MC102||SMA(P)/BNC(P)||1.5m||DC to 2GHz|
|MC201||SMA(P)/SMA(P)||0.5m||DC to 18.5GHz|
|MC202||SMA(P)/SMA(P)||3m||DC to 18.5GHz|
|MC203||SMA(P)/SMA(P)||4m||DC to 18.5GHz|
|MC204||SMA(P)/SMA(P)||1.5m||DC to 18.5GHz|
|MC301||SMA(P)/SMA(P)||0.5m||DC to 10GHz|
|MC302||SMA(P)/SMA(P)||1m||DC to 10GHz|
|MC303||SMA(P)/SMA(P)||1.5m||DC to 10GHz|
|MC304||SMA(P)/N(J)||0.2m||DC to 4GHz|
|MC305||SMA(P)/N(P)||0.2m||DC to 4GHz|
|MC306||SMA(P)/BNC(J)||0.2m||DC to 2GHz|
|MC307||SMA(P)/BNC(P)||0.2m||DC to 2GHz|
|MC308||N(P)/N(P)||0.5m||DC to 10GHz|
|MC309||N(P)/N(P)||1m||DC to 10GHz|
|MC310||N(P)/N(P)||1.5m||DC to 10GHz|
|MC311||N(P)/SMA(J)||0.2m||DC to 10GHz|
|MC312||N(P)/BNC(J)||0.2m||DC to 2GHz|
|MC313||N(P)/BNC(P)||0.2m||DC to 2GHz|
|MC314||BNC(P)/BNC(P)||1.5m||DC to 2GHz|
Communication Cable RS-232C D-sub 9pins cable MI180
Connector D-sub 9pins Length 1.5m Applied model MSA300
Communication Cable USB cable MI400